Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: pull-block disconnects as transfers

User: Open Neutral, Location: Inside the Beltway

Asked on: Monday, February 7, 2011 at 12:42 am EST
Answered on: Tuesday, May 14, 2024 at 1:13 am EDT

Question: We will have a panel fed by some inverters. This at 240/120 100A. I'd like a bypass switch in case they spill their magic smoke, and must be pulled. This would switch the panel input from the inverter output, to directly feeding from the upstream panel.It would be seldom if ever used. {We hope...}Rather than a conventional 3p-2T transfer switch; I vaguely recall once seeing a rectangular disconnect block. You yanked it out, and either turned it over or plugged it to the side; hitting other pins. This was the transfer.It would take up less space on the wall, and hopefully cost less.Does such actually exist; would it {still} be legal?

Rotary Disconnect Block

Yes, the rectangular disconnect block you described is called a rotary disconnect block. It provides a simple and compact way to switch the power source between two inputs.

Operation

To disconnect the inverters, pull the block straight out. To connect the upstream power source, rotate the block 180 degrees and push it back in.

Availability and Legality


Rotary disconnect blocks are readily available from electrical suppliers. They are generally used in low-voltage applications, such as those found in residential and commercial buildings.

Code Compliance

In the United States, the National Electrical Code (NEC) permits the use of rotary disconnect blocks for certain applications, including:

Isolation of energy sources

As a means of isolating power sources for maintenance or servicing.


Transfer switches

For switching between different power sources, such as a generator and utility power.However, the specific requirements for transfer switches may vary depending on the local electrical codes. It is always recommended to consult a qualified electrician to ensure compliance with local regulations.

Advantages of Rotary Disconnect Blocks



Compact design

Requires less wall space compared to traditional transfer switches.


Simple operation

Easy to pull out or rotate, even in tight spaces.

Cost-effective

Typically less expensive than other types of transfer switches.

Considerations



Limited current capacity

Rotary disconnect blocks are limited in their current capacity, so they may not be suitable for high-power applications.*

Manual operation:
Requires manual intervention to switch between power sources, which may not be practical in some situations. Flag for review

Previous Question Next Question