Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Value Engineering

User: Alwayslearningelec, Location: NJ

Asked on: Monday, February 7, 2011 at 9:26 am EST
Answered on: Tuesday, May 14, 2024 at 1:14 am EDT

Question: If there are (3) 15kv copper 2/0 conductors being run along a building in 4" RGS could some savings be gained by either running PVC or aluminum conductors?

PVC Conductors

PVC has a lower bending radius than RGS, allowing for easier installation in tight spaces. PVC is more lightweight than RGS, reducing installation time and labor costs. PVC is less expensive than RGS.However, PVC is not fire-resistant, which may be a concern in certain applications.

Aluminum Conductors

Aluminum has a lower electrical resistance than copper, meaning it can carry the same amount of current with a smaller conductor size. Aluminum is lighter than copper, reducing installation time and labor costs. Aluminum is less expensive than copper.However, aluminum is more prone to corrosion and requires special connectors.

Savings Analysis



Assuming a 100-foot run

| Conductor Type | Labor Savings (estimated) | Material Savings (estimated) | Total Savings

---|---|---|---
3 x 2/0 Copper in RGS | - | - | 0 || 3 x 2/0 Aluminum in PVC | $100 | $250 | $350 |

Conclusion:


Based on this analysis, switching to aluminum conductors in PVC conduit could result in significant savings of $350 per 100-foot run. However, the specific savings may vary depending on factors such as the local labor market and the availability of materials. It is recommended to consult with an electrician for a more accurate cost estimate. Flag for review

Previous Question Next Question