User: brian john, Location: Leesburg, VA
Asked on: Monday, February 7, 2011 at 10:23 am EST
Answered on: Tuesday, May 14, 2024 at 1:14 am EDT
Question: I have a customer that recently updated their elevator system. They went from AC/DC motor generators to AC/DC drives.This building is on the fringe of the utility service and has overhead distribution, so they experience numerous voltage sags. These voltage sags result in the drives for the elevators shutting down, they reboot and are operational again.He has several frequency drives in the building and these all ride through these voltage sags.I have asked him to verify with the elevator contractor the LV and UV settings.But short of installing a UPS for these drives, is there anything others have run into that may minimize this issue?I had a hydraulic elevator in the same neighborhood, that with the manufactures help we installed a UPS on the controls only and this resolved the voltage issue. So I am just looking for ideas.
Additional Considerations
Upgrade Drive Firmware
Check if newer firmware versions for the AC/DC drives are available and can improve ride-through capability.
Implement Voltage Compensation Techniques
Use techniques such as voltage compensation or power factor correction to maintain a stable voltage level at the drives.
Add Line Reactors
Line reactors can help reduce voltage fluctuations and improve ride-through performance.
Use Surge Suppressors
Install surge suppressors to protect the drives from voltage spikes and dips.
Consider a Regenerative Drive
Regenerative drives can return excess energy to the power grid, which can help stabilize voltage during voltage sags.
Implement a Dynamic Voltage Regulator (DVR)
A DVR can regulate the voltage supplied to the drives, compensating for voltage fluctuations.
Improve Grounding
Ensure proper grounding of the power system and drives to minimize voltage transients.
Alternative Solutions
Capacitor Bank
Install a capacitor bank near the elevator drives to provide voltage support during voltage sags.
Diesel Generator
Consider using a backup diesel generator to provide a stable power supply during utility outages or severe voltage disturbances.
Remote Power Panel
Install a remote power panel that is connected to a UPS and provides a stable power supply to the elevator drives.*
Battery Backup: Implement a battery backup system specifically designed for critical loads, such as elevator controls, to maintain power during voltage sags. Flag for review