Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: question about nema 3R?

User: [email protected], Location: Plant city,fl

Asked on: Monday, February 7, 2011 at 12:52 pm EST
Answered on: Tuesday, May 14, 2024 at 1:15 am EDT

Question: Does anyone know where i can find information on penetrating a nema 3R inclosure.I have a 3r box i want to install as a feed threw pull box,But i need to come in the bottom and out the top.It's a 18 by 18 by 6 with no factory k.o'sThank You,Colin ChisholmStafford Electric.

National Electrical Code (NEC) Article 501.15(B)(1)

Conduit, tubing, or cable entering or leaving a NEMA 3R enclosure shall be protected against corrosion, mechanical damage, and other adverse environmental conditions.


Article 501.15(B)(2)

Openings in NEMA 3R enclosures for conduit, tubing, or cable shall be made by a listed means.

National Electrical Manufacturers Association (NEMA)
NEMA Website

https://www.nema.org/


NEMA Publication ICS 6

Industrial Controls and Systems: General Requirements

UL Standard for Enclosure Protection
UL 50E

Standard for Enclosures for Electrical Equipment (Environmental Considerations)

Manufacturers' Literature
Contact the manufacturer of the NEMA 3R enclosure for specific installation guidelines and approved methods of penetration.

Recommended Methods Conduit Hub

Install a conduit hub that is listed for use with NEMA 3R enclosures. Seal the hub with a gasket or sealant to ensure watertightness.


Cable Gland

Use a cable gland that is listed for use with NEMA 3R enclosures. Tighten the gland to the specified torque to ensure a watertight seal.

Threaded Fitting

Drill a hole in the enclosure and tap it for a threaded fitting. Install the fitting and seal it with Teflon tape or sealant.


Compression Gland

Use a compression gland that is listed for use with NEMA 3R enclosures. Tighten the gland to compress the cable and form a watertight seal.

Note:
It is important to follow the specific installation instructions provided by the manufacturer of the enclosure and the penetration method. Always use listed components and materials to ensure compliance with the NEC and other applicable codes.* Properly seal all openings and penetrations to maintain the watertight integrity of the enclosure. Flag for review

Previous Question Next Question