Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Looking for answers

User: irrigateman, Location: Chapel Hill, NC

Asked on: Monday, February 7, 2011 at 1:26 pm EST
Answered on: Tuesday, May 14, 2024 at 1:15 am EDT

Question: I have in the past few years seeing contractors glueing conduit connectors onto non-metal Liquid-tite or Seal-tite Conduit. is this the proper way or is this a quick and cheap way .

Gluing conduit connectors onto non-metal Liquid-tite or Seal-tite Conduit is not the proper way to install them. The correct way to install these connectors is to use a compression fitting. Gluing the connectors on can create a weak point in the conduit system, which could lead to leaks or other problems. Compression fittings are designed to create a secure connection that will not leak or come loose.There are a few reasons why contractors might glue conduit connectors onto non-metal Liquid-tite or Seal-tite Conduit. One reason is that it can be quicker and easier than using a compression fitting. Another reason is that it can be cheaper, as glue is less expensive than compression fittings. However, the potential risks of gluing conduit connectors outweigh the benefits.If you are having conduit connectors installed on your non-metal Liquid-tite or Seal-tite Conduit, be sure to ask the contractor to use compression fittings. This will ensure that the connectors are installed properly and that your conduit system will be safe and reliable. Flag for review

Previous Question Next Question