Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: overcurrent protection

User: gatormanrock, Location: NW Florida

Asked on: Monday, February 7, 2011 at 4:01 pm EST
Answered on: Tuesday, May 14, 2024 at 1:16 am EDT

Question: can a 3 pole breaker be used to feed a two pole load? Please provide code reference. thanks

Yes, a 3-pole circuit breaker can be used to feed a 2-pole load. See NEC 210.4(B)(B) Two-Wire Branch Circuits.(1) Dwelling Units. A two-wire branch circuit shall supply only line-to-neutral loads.(2) Other Than Dwelling Units. A two-wire branch circuit may supply line-to-neutral loads or line-to-line loads where the voltage between the ungrounded conductors is not greater than the nominal voltage of the branch circuit.(3) Multiwire Branch Circuits. A multiwire branch circuit shall supply only line-to-neutral loads.(4) Specific Purpose Branch Circuits. A specific-purpose branch circuit shall supply only the equipment specified. Flag for review

Previous Question Next Question