User: David40, Location: Logan, Utah
Asked on: Monday, February 7, 2011 at 5:57 pm EST
Answered on: Tuesday, May 14, 2024 at 1:16 am EDT
Question: I was reading my code book and caught the section on over-current protection for A/C units. The interpretation I got is that if a unit calls for a "Max. Fuse Size" that this indicates the unit is only UL approved for fuses and that fuses must be inserted in that feed somewhere. They go on to discuss the nomenclature for units approved for both fuses and breakers. ( Can't remember the section where I found it )I am going to be installing the wiring for a couple of mini-split A/C systems and the specs call for the "Max. Fuse Size" or 15 Amps. The A/C guy looked at me like I was crazy and told me other electricians he's worked with say they have not used fuses in years. So what's up with this? Is it something new, or something old that nobody enforces any longer?Thank for any input.
Understanding the Code Requirement
The National Electrical Code (NEC) requires over-current protection for all electrical circuits, including those feeding A/C units. The two most common types of over-current protection are fuses and circuit breakers.In general, the "Max Fuse Size" designation on an A/C unit indicates that the unit is UL approved for fuses only. This means that the use of fuses is mandatory for this unit.
Nomenclature for Units Approved for Both Fuses and Breakers
Units that are approved for both fuses and circuit breakers will typically have a "Max Fuse Size/Circuit Breaker" designation. This indicates that either fuses or circuit breakers can be used for over-current protection.
Code Enforcement
The NEC is enforced by local authorities, and the specific requirements may vary depending on the jurisdiction. However, it is generally accepted that the "Max Fuse Size" designation indicates that fuses must be used for that particular A/C unit.
Current Practice
In practice, many electricians have stopped using fuses in residential applications, particularly for A/C units. This is because circuit breakers are considered more convenient and provide better protection against over-current conditions.
Recommendations
For new installations, it is recommended to follow the specifications provided by the A/C manufacturer. If the unit calls for a "Max Fuse Size," then fuses should be used. However, if the unit is approved for both fuses and circuit breakers, then either option can be used.
Discussion with the A/C Guy
It is possible that the A/C guy has been working with electricians who have not been following the code requirement for fuse use on units designated for fuses only. It is important to explain to the A/C guy the NEC requirement and the potential consequences of not using fuses in such cases. Flag for review