Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Tubing cutter for EMT?

User: JES2727, Location: NJ

Asked on: Monday, February 7, 2011 at 7:37 pm EST
Answered on: Thursday, May 23, 2024 at 5:40 pm EDT

Question: Anybody here use a tubing cutter to cut EMT? A guy that just started with me used one of these today:

Yes, tubing cutters can be used to cut EMT conduit. They provide a clean and precise cut, making them a good choice for electricians who need to make accurate cuts. Here are some tips for using a tubing cutter to cut EMT:1. Measure and mark the EMT where you want to cut it.
2. Place the tubing cutter around the EMT, with the blade aligned with your mark.3. Tighten the cutter's handle until the blade just begins to cut into the EMT.
4. Rotate the cutter around the EMT, maintaining even pressure on the handle.5. Continue rotating the cutter until the EMT is completely cut through.
6. Remove the tubing cutter and deburr the edges of the cut.Here are some of the advantages of using a tubing cutter to cut EMT: Clean and precise cuts

Tubing cutters provide a clean and precise cut, which is important for electrical work.


Easy to use

Tubing cutters are easy to use, even for beginners.

Portable

Tubing cutters are portable, so you can take them with you to the job site.Here are some of the disadvantages of using a tubing cutter to cut EMT:


Can be slow

Tubing cutters can be slow compared to other methods of cutting EMT, such as using a hacksaw.*

Not suitable for all types of EMT:
Tubing cutters are not suitable for cutting all types of EMT, such as rigid EMT.Overall, tubing cutters are a good choice for cutting EMT conduit if you need a clean and precise cut. However, they can be slow and may not be suitable for all types of EMT. Flag for review

Previous Question Next Question