Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Minimum Residential OH service conductors

User: Sierrasparky, Location: USA

Asked on: Tuesday, February 8, 2011 at 2:43 am EST
Answered on: Tuesday, May 14, 2024 at 1:17 am EDT

Question: I just had a weird encounter with a POCO serviceman. I had an late night call to replace a burned out Aluminum service conductor at a residence from the Weather head to the meter. It has a 100 amp main and I replaced the AL wire with #4 copper. This is a METER/Combo all in one.The POCO service man came by to reconnect and said it would not pass " you need #2 CU"Is there some new code I am not aware of?I am really pissed that he told this to the customer.

According to the National Electrical Code (NEC)

For service drops (from the weather head to the meter), the minimum wire size for copper is #4 AWG (Aluminum Conduit Wire, Type SE Cu). For service laterals (from the meter to the main disconnect), the minimum wire size for copper is #2 AWG (Aluminum Conduit Wire, Type SE Cu).

In your case

You replaced the burned-out aluminum service conductor with #4 copper, which is acceptable for service drops according to the NEC. The POCO serviceman's statement that #2 CU is required for the service lateral (from the meter to the main disconnect) is correct.

Possible Reasons for the Discrepancy



Local Code

Some local building codes may have stricter requirements than the NEC. It's possible that the POCO service technician is referencing a local code that requires #2 CU for both service drops and service laterals.


Utility Policy

Some utilities may have their own policies that differ from the NEC. For example, the POCO may require #2 CU for all service laterals connected to their system.

Miscommunication

It's also possible that there was a miscommunication between you and the POCO technician. Perhaps you misunderstood which wire size was being discussed.

Recommended Actions



Contact the POCO

Reach out to the POCO and clarify their requirements for service laterals.

Review Local Code

Check with your local building department to see if there are any additional requirements for service wire sizes.


Document the Conversation

Keep a record of your communication with the POCO and any local code officials.

Addressing the Customer's Concerns



Explain the situation

Politely explain the NEC and local code requirements to the customer.


Offer a solution

If the customer agrees, offer to upgrade the service lateral to #2 CU to meet the POCO's requirements.*

Apologize for the inconvenience:
Express your regret that the POCO's comments may have caused any confusion or frustration.It's important to maintain a professional and respectful demeanor when dealing with this situation. By clarifying the requirements and offering a solution, you can minimize any inconvenience and demonstrate your commitment to safety and code compliance. Flag for review

Previous Question Next Question