User: brother, Location: "I have learned, in whatsoever STATE I am, therewi
Asked on: Tuesday, February 8, 2011 at 10:47 am EST
Answered on: Tuesday, May 14, 2024 at 1:18 am EDT
Question: I would like some help on a particular issue, and would like to know others practice. Do you require an 'energized hot work permit' when you are doing 'infrared scanning' of panels??? Basically you are taking the cover off, but sometimes you are taking the 'dead front' off but not all the time.Of course in all situations the appropiate ppe will be worn. So what is the practice in this area??
The requirement for an energized hot work permit when performing infrared scanning of panels depends on the specific circumstances and applicable regulations. Here are some general guidelines
If the "dead front" is removed:
Most jurisdictions require an energized hot work permit. This is because removing the dead front exposes live electrical components, creating the potential for electrical hazards.
If the "dead front" is not removed
Some jurisdictions may not require an energized hot work permit. This is because the infrared scanning is performed through a small opening in the dead front, without exposing live electrical components.
Other factors to consider
Company policy
Your company may have specific requirements for infrared scanning, including whether a hot work permit is necessary.
Local regulations
Local electrical codes and regulations may have specific requirements for hot work permits.
Type of infrared scanner
Some infrared scanners require that the electrical panel be de-energized for safe operation.
Personnel training
Personnel performing infrared scanning should be properly trained and authorized to work on energized electrical equipment.
Recommended Practice
It is generally recommended to obtain an energized hot work permit whenever performing infrared scanning of electrical panels, regardless of whether the dead front is removed. This ensures that appropriate safety protocols are followed, potential hazards are identified, and necessary precautions are taken to mitigate risks.
Additional Considerations: Always wear appropriate personal protective equipment (PPE), including insulated gloves, eye protection, and flame-resistant clothing. Use a non-contact infrared thermometer to minimize the risk of electrical contact. Scan from a safe distance and avoid touching any live electrical components. Be aware of potential tripping hazards and maintain good footing. Flag for review