Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 480 to 416?

User: edbukont, Location: Illinois

Asked on: Tuesday, February 8, 2011 at 2:27 pm EST
Answered on: Tuesday, May 14, 2024 at 1:18 am EDT

Question: We have a broadcast transmitter to install than can accept up to @ 440V. The manufactuer says 480V is not acceptable, and that 416 is the max preferred.The utility says they cannot provide 416, but only 277/480 WYE (or otherwise something lower in the <240 range.What sort of transformer do we need to suggest to the building prefrabricator should be researched to go from 480 (possibly Delta) to 416 WYE?We realize this will need to be further reviewed by an electrical contractor or PE, but we are getting nowhere with the client's inhouse engineer, so we have to move the information dialog along.Thank you

Transformer Specifications



Input Voltage

480V Delta (line-to-line)


Output Voltage

416V WYE (line-to-neutral)

Power Rating

To meet the power requirements of the broadcast transmitter (consult with the transmitter manufacturer)


Isolation Type

Isolation transformer (to provide electrical isolation between the primary and secondary circuits)

Transformer Design



3-Phase Transformer

Since the input voltage is three-phase Delta, a three-phase transformer is required.


Step-Down Configuration

The transformer should have a step-down configuration to reduce the voltage from 480V to 416V.

Meet Electrical Codes

The transformer must comply with all applicable electrical codes and safety standards.

Other Considerations



Harmonic Distortion

The transmitter may generate harmonic currents. The transformer should be rated to handle potential harmonic distortion levels.

Efficiency

A high-efficiency transformer will minimize energy losses.


Cooling

The transformer may require forced cooling if the power rating is high.

Enclosure

The transformer should have a suitable enclosure for the application (e.g., indoor or outdoor).

Recommendation:
Suggest the installation of a three-phase, step-down isolation transformer with the following specifications: Input Voltage: 480V Delta Output Voltage: 416V WYE Power Rating: As per transmitter requirements Emphasize the importance of consulting with an electrical contractor or Professional Engineer (PE) for proper sizing, installation, and safety verification. Flag for review

Previous Question Next Question