User: GlennH, Location: Cleveland, Ohio
Asked on: Tuesday, February 8, 2011 at 5:27 pm EST
Answered on: Tuesday, May 14, 2024 at 1:19 am EDT
Question: We often see small transformers doubled up (i.e. 40va and 40va) to power up zone valves for heating systems.Someone asked today what would happen if two different size transformers were paralleled? like a 40va and a 75va.would the load be proportional beween the two or would the load be equal between them?just curious
When two transformers of different sizes are paralleled, the load is not proportional between the two. The load is shared between the transformers in proportion to their power ratings.This means that the larger transformer will carry a larger share of the load than the smaller transformer. For example, if a 40VA transformer is paralleled with a 75VA transformer, the 75VA transformer will carry approximately 64% of the load, while the 40VA transformer will carry approximately 36% of the load.This is because the larger transformer has a lower internal impedance than the smaller transformer. As a result, the larger transformer can supply more current at a given voltage than the smaller transformer.It is important to note that the transformers must be of the same voltage rating in order to be paralleled. If the transformers have different voltage ratings, the higher voltage transformer will force current into the lower voltage transformer, which could damage the lower voltage transformer. Flag for review