Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Are 42 circuit load centers common in your area

User: X-27, Location: Georgia

Asked on: Tuesday, February 8, 2011 at 5:49 pm EST
Answered on: Tuesday, May 14, 2024 at 1:19 am EDT

Question: I sometimes consider using 42 circuit load center on various jobs.In my area 42 circuit panels are somewhat rare, (40 circuits is the norm). Generally the local supply houses don't stock them, (but they are happy to order them).I always try to leave 3 to 6 circuits as spares, hence the interest in a larger panel.I'm thinking of using more 42 circuit panels, any reason I should not use a 42 Circuit Load center?

Generally speaking, there is no reason why you should not use a 42-circuit load center. However, there are a few factors to consider: Availability

As you mentioned, 42-circuit load centers are not as common as 40-circuit panels, so you may need to order them specifically. This can lead to longer lead times and potentially higher costs.


Cost

42-circuit load centers are typically more expensive than 40-circuit panels due to their larger size and increased capacity.

Space requirements

42-circuit load centers are physically larger than 40-circuit panels, so you will need to ensure that you have sufficient space in your electrical panel for the larger unit.


Future needs

If you anticipate the possibility of needing additional circuits in the future, it may be more cost-effective to install a larger load center now rather than having to add another panel later.*

Local codes:
In some areas, there may be local codes or regulations that limit the number of circuits allowed in a single load center. Check with your local electrical inspector or building department to confirm that using a 42-circuit load center is permissible.Overall, as long as you are aware of the potential drawbacks and have considered the factors listed above, there is no technical reason why you cannot use a 42-circuit load center. It can provide you with additional flexibility and capacity for future electrical needs. Flag for review

Previous Question Next Question