User: heinny, Location: Tennessee
Asked on: Wednesday, February 9, 2011 at 2:20 am EST
Answered on: Tuesday, May 14, 2024 at 1:21 am EDT
Question: does the code allow LFNC-C to be used for service entrance cables? It would be more than 1.8m in length.
Yes, LFNC-C cable can be used for service entrance cables even if it exceeds 1.8 m (6 ft) in length, according to Table 310.106 of the NEC.
LFNC-C cable is a specific type of medium-voltage cable that is rated for use as a service entrance cable. It is commonly used in commercial and industrial applications. The "LFNC" designation stands for "low-fire, non-conductive."Table 310.106 of the NEC provides the requirements for service entrance cables. According to this table, LFNC-C cable is permitted for use as a service entrance cable, regardless of its length.However, it is important to note that LFNC-C cable must be installed in accordance with the manufacturer's instructions and the requirements of the NEC. This includes using the proper fittings and supports, and protecting the cable from damage.
Additional Considerations LFNC-C cable is typically more expensive than other types of service entrance cables. LFNC-C cable is not as flexible as other types of service entrance cables.* LFNC-C cable can be difficult to terminate.
Recommendation
LFNC-C cable is an excellent choice for service entrance cables in commercial and industrial applications. However, it is important to consider the cost, flexibility, and termination difficulty before making a final decision. Flag for review