Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: IT Data Racks location

User: Davebones, Location: North Of Tampa Fl

Asked on: Wednesday, February 9, 2011 at 9:54 am EST
Answered on: Tuesday, May 14, 2024 at 1:21 am EDT

Question: We are having new data racks installed thru-out our manufacturing plant . They want to mount these about 8 ft up on the wall . These will have to be accessed by way of a ladder . Is there anything in the code that says you can't mount these like that ???

NFPA 70 (National Electrical Code)Article 110.26(D)(3):> "Equipment shall be accessible to qualified persons without exposing them to electrical hazards."Article 300.22(C):> "Lamps in industrial occupancies shall be located so that more than one circuit supplies essential lighting."Interpretation

While these code articles do not specifically prohibit mounting data racks 8 ft up on the wall, they require that equipment be accessible to qualified persons without exposing them to electrical hazards.

Accessibility

Mounting racks 8 ft up on the wall would require the use of a ladder to access them. This could create an electrical hazard if the ladder is not properly secured or if the person using the ladder is not qualified to work on electrical equipment.


Multiple Circuits

Essential lighting must be supplied by more than one circuit. If the data racks contain lighting, mounting them 8 ft up on the wall could make it difficult to access the second circuit in the event of a failure.

Recommendation

It is recommended to mount data racks at a height that is both accessible and safe for qualified persons to work on. This may require using a platform or other means of access to reach the racks.

Additional Considerations:
The type of ladder used to access the racks should be appropriate for the height and weight of the equipment. The work area should be well-lit and free of obstructions.* Qualified persons should be trained on the safe use of ladders and electrical equipment. Flag for review

Previous Question Next Question