User: 101010, Location: Mission Viejo, CA
Asked on: Wednesday, February 9, 2011 at 12:26 pm EST
Answered on: Tuesday, May 14, 2024 at 1:21 am EDT
Question: Coming up out of slab where first 18" is classified (class 1 div 2) I just have to put a seal after the 18" before my outlets. right? Gal pipe through classified area
Yes, that is correct. According to the National Electrical Code (NEC), when a conduit emerges from a classified area (Class 1, Div 2 in this case), a listed seal must be installed to prevent the passage of gases or vapors. The seal should be installed within 18 inches of the point where the conduit exits the classified area. After the seal is installed, you can then install electrical outlets as needed. Flag for review