User: Davebones, Location: North Of Tampa Fl
Asked on: Wednesday, February 9, 2011 at 2:24 pm EST
Answered on: Tuesday, May 14, 2024 at 1:22 am EDT
Question: We have a journeyman electrician that takes care of the lighting in our plant . He disconnects the wire nut at the fixture ( Without Rubber Gloves ) when he changes the ballast to shut off power to the light . I say if he does this this is considered "Hot Work" and he needs a Hot Work Permit and he has to wear rubber gloves . Am I correct in the way I am looking at this ?????
Yes, you are correct.According to the National Fire Protection Association (NFPA) 70E, Standard for Electrical Safety in the Workplace, any work performed on energized electrical equipment is considered "hot work" and requires specific safety measures, including: Obtaining a Hot Work Permit Wearing appropriate Personal Protective Equipment (PPE), including rubber glovesBy disconnecting the wire nut without rubber gloves, the electrician is exposing themselves to the risk of electrical shock. The Hot Work Permit ensures that the proper safety precautions are in place, such as isolating the circuit and verifying that it is de-energized before working on the equipment.Rubber gloves provide insulation against electrical shock and are essential PPE for any hot work activities. They help protect the electrician from contact with energized conductors and reduce the risk of serious injury or death.Therefore, your assessment that the electrician's actions constitute hot work and require a Hot Work Permit and rubber gloves is correct. It is crucial to prioritize electrical safety and comply with established safety standards to prevent accidents and protect personnel. Flag for review