User: Ugly, Location: Tennessee
Asked on: Wednesday, February 9, 2011 at 3:33 pm EST
Answered on: Tuesday, May 14, 2024 at 1:22 am EDT
Question: I've been tasked with integrating our system, a collection of various equipment on a network of branch circuits, into a facility currently being designed/built. I will be supplied with, presumably code compliant, power drops we can tap into for our system power. I need to choose downstream breaker panels, breakers, conductors etc.I have been supplied with the following information about the upstream devices: line voltage and circuit breaker trip values.Since I wasn't given the AIC rating of the upstream devices by the facility designer I'm wondering if it is somehow implied.Is it safe to assume an installations power delivery devices AIC rating, and thus what required ratings our systems devices should meet or exceed, based on something like standard practice peculiar to facility power requirements, it's voltage, locale, etc?I suspect I don't have enough info and need to talk ask the facility designer but figured I'd run it past this esteemed panel of experts first since I'm new.
No, it is not safe to assume an installation's power delivery devices AIC rating based on standard practice.
The AIC rating (Ampere Interrupting Capacity) is a critical safety parameter for electrical devices, indicating their ability to safely interrupt and withstand the maximum fault current that can flow through a circuit during an electrical fault.AIC ratings are not standardized across different facilities, voltages, or locales. They are typically determined by the specific electrical system design, fault current calculations, and applicable electrical codes.
It is essential to obtain the AIC rating information directly from the facility designer or the project specifications. You should request the facility designer to provide you with the AIC ratings of the upstream power sources for your system. If the AIC ratings are not available, you should perform fault current calculations to determine the maximum fault current that can flow through your system.* You can then select downstream breaker panels, breakers, and conductors that meet or exceed the required AIC rating.
Assuming an AIC rating can be dangerous and may compromise the safety of your system. If the downstream devices are not rated for the actual AIC of the power source, they may fail to interrupt the fault current properly, potentially leading to catastrophic consequences, such as equipment damage, electrical fires, or injury.
Always prioritize safety by obtaining the accurate AIC ratings from the source and selecting appropriately rated components. Flag for review