User: ASK_EDDIE, Location: TEXAS
Asked on: Thursday, February 10, 2011 at 7:17 am EST
Answered on: Tuesday, May 14, 2024 at 1:24 am EDT
Question: I'm looking for a type FS breaker, the panel is an Eaton type PH panel board.The existing breakers are Eaton type FS when checking online the type FS' most of the breakers come up to thomas & betts . THere is also one challenger type breaker in this panel. I guess im wondering was this a hybid type panel.I called the local cutler hammer rep. they say i need another type of breaker and akit to install it. It's a 100 amp 3ph 480v , The breaker and kit have a price of 900.00.Is the type FS breaker obsolete ? Thanks
Type FS Breakers
Type FS breakers are still available, but they are becoming obsolete. They are no longer manufactured by Eaton, and most other manufacturers have phased them out as well.
Hybrid Panels
It is possible that your Eaton PH panel board is a hybrid panel, which means it can accept both FS and Challenger type breakers. However, it is more likely that the Challenger type breaker is an older or unique breaker that was installed as a replacement.
Recommended Breaker
For a 100 amp 3ph 480v breaker in a Eaton PH panel board, the recommended replacement is an Eaton CH type breaker. You will also need an adapter plate to install the CH breaker into the FS slot.
Price
The price of a 100 amp 3ph 480v CH breaker and adapter plate should be significantly less than $900. It is recommended to check with multiple suppliers for pricing.
Obsolete Status
Type FS breakers are considered obsolete, but they are still available in limited quantities. It is possible to find them by searching online or contacting electrical supply distributors. However, it is important to note that they may be more expensive than newer breaker types. Flag for review