User: A/A Fuel GTX, Location: WI & AZ
Asked on: Thursday, February 10, 2011 at 7:45 am EST
Answered on: Tuesday, May 14, 2024 at 1:24 am EDT
Question: I've got a customer wanting to use VFD's to control 3 phase exhaust fans in his shop. I've never installed VFD's before and I'm wondering if there is anything special about these or are they simply speed controls with wiring similar to mag starters with L 1,2,3 on top and T 1,2,3 on the bottom of the controller?
Special Considerations for VFDs with Exhaust Fans
While VFDs (Variable Frequency Drives) function similarly to mag starters in terms of wiring, there are some unique considerations when using them with 3-phase exhaust fans:
Harmonics
VFDs generate harmonic currents, which can disrupt other electrical equipment and cause motor problems. It's crucial to use VFDs with integrated harmonic filters or install external filters to minimize harmonic distortion.
Motor Overload Protection
Unlike mag starters, VFDs do not provide inherent overload protection for the motor. Additional overload protection devices, such as thermal overload relays or electronic overload protectors, must be installed in series with the motor.
Motor Voltage Rating
VFDs must be correctly sized to match the voltage rating of the exhaust fan motor. Installing an undersized VFD can damage the motor, while an oversized VFD can create excessive voltage drop and reduce fan performance.
Motor Type
Exhaust fans typically use squirrel-cage induction motors. VFDs specifically designed for induction motors should be used to ensure proper operation and motor longevity.
Ventilation
VFDs generate heat during operation. Proper ventilation around the VFD is essential to prevent overheating and potential damage.
Wiring Considerations
Input Power
Connect the L1, L2, and L3 terminals of the VFD to the incoming 3-phase power supply.
Motor Output
Connect the T1, T2, and T3 terminals of the VFD to the motor terminals U, V, and W, respectively.
Grounding
Ensure that the VFD and motor are properly grounded to prevent electrical shock and damage.
Control Wiring
Connect the control terminals (e.g., Run, Stop, Speed Reference) according to the VFD manufacturer's instructions.
Additional Tips: Refer to the VFD manufacturer's documentation for specific wiring instructions and safety precautions. Consider using an isolation transformer to protect the VFD from voltage spikes or surges. Perform commissioning procedures such as speed calibration and parameter optimization to ensure optimal fan performance and extend motor lifespan. Flag for review