User: MD88, Location: Pa.
Asked on: Thursday, February 10, 2011 at 12:21 pm EST
Answered on: Tuesday, May 14, 2024 at 1:24 am EDT
Question: Hello,I was wondering if anyone has any experience splicing a 3/C 5kV shielded cable to three 1/C 5kV shielded cables? Does anyone know a manufacturer that makes a kit for that? I know 3M makes one for splicing 3/C PILC cable to three 1/C EPR cables... but I'm talking about all EPR cable.Thanks!
Experience and Kit Availability
Splicing a 3/C 5kV shielded cable to three 1/C 5kV shielded cables is possible but requires specialized equipment and expertise. It is generally not recommended for non-experienced personnel.
Manufacturers with Splicing Kits
The following manufacturers offer splicing kits for this application: Raychem (TE Connectivity): CCPX-31C kit 3M: Does not currently offer a specific kit for this application, but has field-engineered solutions available.
Procedure
The general procedure for splicing 3/C to 1/C shielded cables involves:1. Removing the outer jacket and shielding from the 3/C cable.
2. Identifying and separating the conductors and grounding cables.3. Connecting the individual conductors from the 3/C cable to the corresponding conductors on the 1/C cables using heat-shrink connectors.
4. Splicing the grounding cables using mechanical or compression connectors.5. Reapplying the outer jacket and shielding to the spliced area.
Considerations Ensure that the cable sizes, insulation type, and voltage ratings match. Use compatible splicing materials and equipment. Follow the manufacturer's instructions carefully. Perform electrical tests (continuity, insulation, and ground) before energizing the cable.
Safety Precautions Wear appropriate personal protective equipment (PPE). De-energize the cables before splicing. Use proper grounding techniques. Work in a well-ventilated area. Flag for review