Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Directional Boring

User: Mike01, Location: MidWest

Asked on: Thursday, February 10, 2011 at 1:58 pm EST
Answered on: Tuesday, May 14, 2024 at 1:25 am EDT

Question: When utilizing directional boring, is it possible to pull multiple conduits with one bore? For example multiple 2"C's at one time?

Yes, it is possible to pull multiple conduits with one bore using directional boring. This technique is known as multi-duct installation. Here's how it works

1. Pilot Bore:
A pilot bore is first created using a directional boring machine, following the desired alignment and depth.2. Reaming

After the pilot bore is complete, a larger-diameter reamer is used to enlarge the bore to accommodate the multiple conduits.

3. Duct Insertion

Multiple conduits are bundled together and inserted into the reamed bore. The conduits are typically made of HDPE (High-Density Polyethylene) or PVC (Polyvinyl Chloride).

4. Pulling

A pulling head is attached to the bundled conduits. The pulling head is connected to a winch or capstan, which pulls the conduits through the bore.

5. Placement

As the conduits are pulled through the bore, they are guided and positioned to the desired location.

Considerations for Multiple Conduit Pull



Bore Size

The bore size must be large enough to accommodate the bundled conduits with adequate clearance.

Conduit Material

HDPE and PVC are commonly used for multiple conduit pulls due to their flexibility and durability.


Conduit Diameter

The diameter of the conduits should be considered in relation to the bore size.

Bundling

The conduits are bundled together using straps or bands to maintain their position during pulling.


Lubrication

Lubricants may be used to reduce friction and facilitate pulling.*

Equipment:
A suitable pulling winch or capstan is required to provide the force necessary for pulling the conduits.Multi-duct installation using directional boring is a common practice for installing multiple conduits for electrical, communication, or other utility applications. It offers the advantage of minimizing excavation and surface disruption, making it a cost-effective and efficient method. Flag for review

Previous Question Next Question