Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: carflex in walls

User: brett711, Location: Chapel Hill, NC

Asked on: Thursday, February 10, 2011 at 6:24 pm EST
Answered on: Tuesday, May 14, 2024 at 1:26 am EDT

Question: is carflex allowed in walls, changing over from pvc. i know the wirepull could be hard but is it legal.

Yes, Carflex is allowed in walls as a replacement for PVC.

NEC Code Requirements



Article 334.10(4)
permits the use of "other approved flexible raceways" in walls, besides PVC conduit. Article 334.23(A) classifies Carflex as a Type LFNC (Liquidtight Flexible Nonmetallic Conduit). Article 334.23(B) permits Type LFNC to be used in hazardous (classified) locations, where PVC is not permitted.

Advantages of Carflex

Liquidtight construction provides protection against moisture and contaminants. Flexible and easy to pull wires through, reducing wire damage. Resistant to corrosion and chemicals. Can be used in both dry and wet locations.

Wire Pulling Considerations

While pulling wires through Carflex can be more challenging than through PVC, it is possible with the proper precautions:
Use wire pulling lubricant or soap. Use a fish tape or pulling string to guide the wires. Pull small sections at a time and don't overfill the conduit.

Installation Requirements

Carflex must be properly secured to prevent movement. Joints must be watertight and strain-relieved.* The conduit must be sized according to the number and size of wires.

Conclusion:


Carflex is a suitable and legal replacement for PVC conduit in walls, provided it is installed according to NEC requirements and the considerations for wire pulling are addressed. Its liquidtight construction and durability make it an excellent choice for protecting wires in challenging environments. Flag for review

Previous Question Next Question