User: TNGuy81, Location: Nashville TN
Asked on: Thursday, February 10, 2011 at 11:07 pm EST
Answered on: Tuesday, May 14, 2024 at 1:27 am EDT
Question: Hey im not sure this is the correct place to ask this question but I didnt know where else to post it. Im still new to this trade and learning and just ran across something I cant wrap my head around. I have worked with 120/240 single phase, 120/208 3 phase, 277/480 3 phase but never a 3 phase 120/240v system.. I always thought 240v was single phase and I dont really understand how this works with 3 phase or why for that matter..? Also is this a common method still used or is it a older Delta system. I do appreciate any info on this.
120/240V 3-Phase System
A 120/240V 3-phase system is indeed a type of 3-phase electrical system. It differs from the more common 120/208V and 277/480V 3-phase systems in the lower voltage.In a 3-phase system, three alternating currents are out of phase by 120 electrical degrees. This means that the voltage peaks and troughs of the three phases are offset by one-third of a cycle.
How it Works
In a 120/240V 3-phase system, the three phases are connected to a Δ (delta) configuration, which means they are connected in a triangular shape. This configuration produces two voltages: 120V Phase-to-Neutral
Measured between any phase and the neutral point.
240V Phase-to-Phase
Measured between any two phases.
Uses120/240V 3-phase systems are primarily used in commercial and industrial applications where heavy-duty loads are required. They provide a higher power capacity compared to single-phase systems with the same voltage rating.
Commonality
While not as common as the more prevalent 3-phase systems mentioned above, 120/240V 3-phase systems are still used in some older buildings and industrial facilities.
Older vs. Newer Systems120/240V 3-phase systems are not considered particularly old. They were commonly used alongside the more standard voltage configurations in the past and are still in use today. However, newer installations tend to favor the more efficient 120/208V and 277/480V 3-phase systems.
Conclusion
A 120/240V 3-phase system is a type of 3-phase electrical system that provides both 120V and 240V voltages. It is used in commercial and industrial applications where higher power capacity is required. While not as common as other 3-phase configurations, it is still used in some older buildings and facilities. Flag for review