Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Does anyone use terminal strips?

User: mike33, Location: Irvine, CA

Asked on: Friday, February 11, 2011 at 1:01 am EST
Answered on: Tuesday, May 14, 2024 at 1:27 am EDT

Question: I have approximately 60 #12 THHN wires in a junction box that need to be spliced. I always use wire nuts, but I would like to give it a cleaner look.Has anyone ever used terminal strips for something like this?Are there any code issues?http://www.idealindustries.com/prodDetail.do?prodId=89-212&div=0&l1=terminal_blocks_strips

Yes, terminal strips can be used for splicing large numbers of wires in a junction box.Code Considerations



National Electrical Code (NEC)

Section 300.15 requires that splices be made in a manner that is "approved for the purpose" and "mechanically secure".


Types of Terminal Strips



Insulated terminal strips

Permitted for use in most circuits, including lighting, receptacles, and circuits protected by circuit breakers or fuses.


Non-insulated terminal strips

Only permitted in low-voltage circuits (e.g., telephone, intercom) in residential occupancies.

Size and Current Rating

Select terminal strips rated for the maximum current that will flow through the spliced wires.


Protection from Overheating

Terminal strips should be mounted in a way that allows for proper heat dissipation.

Benefits of Using Terminal Strips



Cleaner Appearance

Terminal strips provide a more organized and professional-looking splice than wire nuts.


Increased Reliability

Screw terminals ensure a secure connection that is less likely to fail over time.

Space Savings

Terminal strips can be mounted in a smaller space compared to wire nuts, which can be especially beneficial in crowded junction boxes.


Easier to Trace and Troubleshoot

Terminal strips make it easy to trace wires and identify which circuit they belong to.

Installation Instructions

1. Strip insulation from wire ends.
2. Insert wires into the appropriate terminals on the terminal strip.3. Tighten screws to secure wires.
4. Insulate the terminal strip with electrical tape or a cover to prevent accidental contact.


Additional Tips:
Use a torque screwdriver to ensure that screws are tight, but not overtightened. If using insulated terminal strips, make sure the insulation extends over the wire insulation to prevent short circuits.* Label the terminal strip with a circuit number or other identifier for easy reference. Flag for review

Previous Question Next Question