Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Disconnect for a Motorized piece of equipment

User: wmeek, Location: Texas

Asked on: Friday, February 11, 2011 at 4:12 pm EST
Answered on: Tuesday, May 14, 2024 at 1:28 am EDT

Question: Does the code inply that you need a disconnect for a piece of equipment that has a controller on it with a disconnecting means. As long as the disconnecting means is capable to be locked in the open position.

Yes, the code implies that you need a disconnect for a piece of equipment that has a controller on it with a disconnecting means, even if the disconnecting means is capable of being locked in the open position.The code states that "where a disconnecting means is provided for a motor and the controller is separate from the motor, there shall also be a disconnecting means for the controller." This means that even if the controller has a disconnecting means, there must also be a disconnecting means for the motor.The reason for this is that the disconnecting means for the controller is not always accessible when the motor is being serviced. For example, if the controller is mounted on a wall, the disconnecting means may be difficult or impossible to reach from the floor. In this case, a separate disconnecting means for the motor would be necessary to ensure that the motor can be safely serviced.Additionally, the code states that "the disconnecting means for the controller shall be capable of being locked in the open position." This means that the disconnecting means must be able to be locked in the open position to prevent accidental operation of the motor. This is important for safety, as it ensures that the motor cannot be started accidentally while it is being serviced. Flag for review

Previous Question Next Question