Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Article 700 clarification - 2 Inverters - Branch Conduit

User: Dave F, Location: Ventrura, CA

Asked on: Friday, February 11, 2011 at 4:58 pm EST
Answered on: Tuesday, May 14, 2024 at 1:29 am EDT

Question: Can anyone shed a little light on a question I have? We have two seperate inverters and I'm wondering if I can combine branch conductors from the two different inverters into the same branch conduit? - - I realize that it might not be deemed the safest practice BUT I can't see anything in the 2005-2011 NEC that does not allow it. Ideas?

NEC 2005-2011Section 690.11, "General," does allow parallel operation of multiple inverters. However, it does not explicitly address the combination of branch conductors from different inverters into the same conduit.

NEC 2017 and LaterSection 690.11 was revised in the 2017 NEC to include a new requirement for parallel operation of multiple inverters:> Conductors from separately derived sources shall be contained in separate raceways.

This requirement has been adopted in subsequent editions of the NEC, including the 2011 and 2020 editions.

Conclusion

Based on the language of the 2005-2011 NEC, it may have been permissible to combine branch conductors from different inverters into the same conduit. However, the 2017 and later editions of the NEC explicitly prohibit this practice.

Recommendation

It is always recommended to follow the latest edition of the NEC. In this case, it is clear that combining branch conductors from different inverters into the same conduit is not allowed. This requirement is in place to ensure electrical safety and prevent potential hazards. Flag for review

Previous Question Next Question