Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: GFCI's on 3 phase circuits

User: farnorthsparky, Location: Fairbanks, Alaska

Asked on: Friday, February 11, 2011 at 6:27 pm EST
Answered on: Tuesday, May 14, 2024 at 1:29 am EDT

Question: Just curious, when installing GFCI receps on a three phase circuit, does each phase need it's own neutral, since GFCI's operate due to an imbalance between hot and neutral?

No, each phase does not need its own neutral when installing GFCI receptacles on a three-phase circuit.GFCIs operate by comparing the current flowing in the hot and neutral conductors. If there is an imbalance between the two, it indicates a ground fault, and the GFCI will trip.In a three-phase system, the neutral conductor carries the sum of the currents flowing in the three phases. Therefore, the GFCI can use the single neutral conductor to detect any imbalance between the hot conductors and the neutral conductor.Using a separate neutral conductor for each phase would not provide any additional protection and would be unnecessary. Flag for review

Previous Question Next Question