User: magoo66, Location: MA
Asked on: Friday, February 11, 2011 at 9:42 pm EST
Answered on: Tuesday, May 14, 2024 at 1:30 am EDT
Question: I was taught as an apprentice that running thread or all-thread was not allowed for service entrance conduit, can't seem to find where it is specifically prohibited in the code. Is it a listing/labeling issue, or just a shop/local thing?
All-thread rod is not listed for use as a service entrance conductor. It is not listed in Table 310.15(B)(1)(a) through (f) as an approved service entrance conductor material. All-thread is threaded rod, which is intended for other uses such as fasteners and structural applications. Service entrance conductors must be listed for the application and be suitable for the environment as outlined in Chapter 3. Flag for review