Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Energized human body

User: chris kennedy, Location: Miami Fla.

Asked on: Saturday, February 12, 2011 at 5:14 pm EST
Answered on: Tuesday, May 14, 2024 at 1:31 am EDT

Question: When one comes in contact with an energized conductor but doesn't complete the circuit back to the source, why don't we feel the sudden change of potential?Thanks

When a person comes in contact with an energized conductor but does not complete the circuit back to the source, they do not feel the sudden change in potential because

1. Current Flow:

For an electric current to flow, there must be a complete circuit, meaning a closed path from the source, through the conductor, and back to the source. Since the circuit is not complete, no current flows.2. Lack of Potential Difference

A potential difference, or voltage, is created when there is a difference in electrical potential between two points in a circuit. In this case, there is no potential difference between the person and the source because the circuit is incomplete.

3. Capacitance

When a person touches the energized conductor, their body acts as a capacitor. The conductor represents one plate of the capacitor, while the person's body represents the other plate. Since the circuit is not complete, the capacitor does not fully charge, and thus, no current flows.

4. High Resistance

The human body has a relatively high electrical resistance compared to a conductor. This means that even if the circuit were complete, the amount of current that would flow through the person's body would be very small.

5. Perception Threshold:


The human body has a perception threshold for electrical current. This means that below a certain level of current, the body cannot sense it. The current that would flow through the person in this situation would likely be below the perception threshold.Therefore, when a person comes in contact with an energized conductor but does not complete the circuit, they do not feel the sudden change in potential because there is no current flow, no potential difference, and the current that would flow is below their perception threshold. Flag for review

Previous Question Next Question