User: airdog3333, Location: 3 Hr 2 Min from Winged Horses
Asked on: Sunday, February 13, 2011 at 11:50 am EST
Answered on: Tuesday, May 14, 2024 at 1:32 am EDT
Question: is there anything in the 2008 code that tells me how FAR a groud rod may be from the disconnt. or house ????????and when sizing the wire for the ground rod i know no more than a #6but if i go smaller then that should i use table 250.122 ?????
Distance from Disconnect or House
The 2008 NEC does not specify a specific maximum distance for the ground rod from the disconnect or house. However, it does provide guidance on proper grounding practices:
Section 250.52(A)(1) states that "Grounding electrodes shall be connected to the grounded circuit conductor or equipment-grounding conductor at the service: (1) At any accessible point from the weatherproof enclosure or from the outside of the building or structure." Section 250.54(A) states that "Grounding electrodes shall be connected to each other in the manner specified in 250.32."Wire Sizing for Ground Rod
Section 250.66(C) states that "The grounding electrode conductor shall not be smaller than the equipment grounding conductor." Section 250.122 provides a table for sizing equipment grounding conductors based on ampacity.If you choose to use a wire size smaller than #6 AWG for the ground rod, you must use Table 250.122 to determine the appropriate size based on the ampacity of the circuit. Flag for review