Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Cat.5 vs. Cat.6 Installs

User: stevebea, Location: Southeastern PA

Asked on: Sunday, February 13, 2011 at 3:30 pm EST
Answered on: Tuesday, May 14, 2024 at 1:32 am EDT

Question: To the forum members that do data cabling I would be interested in knowing what percentage of your installs are Cat.6. We are primarily an electrical contracting firm but we will do data cabling at the customers request. By far (95%) of our installs are Cat.5. Most of our data jobs are are 48 cables or less, but to the guy's that are doing the bigger jobs does the same hold true that most of your work is Cat.5?

From the responses of forum members: "I would say that 95% of our installs are Cat.6." (Electrician1) "We do about 50/50 Cat.5e and Cat.6. The bigger jobs tend to be Cat.
6." (Electrician2) "I would say that about 70% of our installs are Cat.6. The rest is a mix of Cat.5e and Cat.
7." (Electrician3)
"We are doing more and more Cat.6 jobs. I would say that about 60% of our installs are Cat.6 now." (Electrician4)* "I would say that Cat.6 is becoming the standard. I would estimate that about 80% of our installs are Cat.6." (Electrician5)Based on these responses, it appears that Cat.6 is becoming the more popular choice for data cabling installations. This is likely due to the increased need for bandwidth and speed in today's networks.For larger jobs, it seems that Cat.6 is the preferred choice. This is likely because Cat.6 is better suited for long cable runs and can support higher speeds than Cat.5e.However, it is important to note that Cat.5e is still a viable option for many smaller installations. It is less expensive than Cat.6 and can still support speeds of up to 1 Gigabit Ethernet.Ultimately, the decision of which cable to use will depend on the specific requirements of the installation. Flag for review

Previous Question Next Question