Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Power Analyzer recording interval

User: AAEB, Location: Southeast Asia

Asked on: Monday, February 14, 2011 at 2:31 am EST
Answered on: Tuesday, May 14, 2024 at 1:33 am EDT

Question: guys,what is the recommended recording intervals to capture power system's behavior? as of the moment, we are doing it in a 1 minute interval but i am not that confident that we are capturing all of the electrical events.thanks!

The recommended recording intervals for capturing power system behavior depend on the specific application and the type of electrical events you are interested in capturing. However, here are some general guidelines: For capturing steady-state behavior

A recording interval of

10-15 minutes
is generally sufficient. This interval is long enough to capture slow changes in the system, such as load variations and voltage fluctuations, while still providing a reasonable amount of data for analysis.
For capturing transient events

A recording interval of

1-2 seconds
is typically recommended. This interval is short enough to capture fast-changing events, such as faults, switching operations, and harmonics. For capturing high-frequency events

A recording interval of

100-200 microseconds
or even shorter may be required. This interval is necessary to capture very fast-changing events, such as electromagnetic transients and lightning strikes.In your case, if you are not confident that you are capturing all of the electrical events with a 1-minute recording interval, you may want to consider decreasing the interval. However, keep in mind that decreasing the interval will also increase the amount of data that you need to store and process.Here are some additional factors to consider when choosing a recording interval:
The type of equipment you are using

Some devices may have limitations on the minimum recording interval they can support.

The cost of data storage

Storing large amounts of data can be expensive.


The availability of resources:
You may not have the resources to collect and process data at a very high recording interval.Ultimately, the best recording interval for your application will depend on your specific needs and constraints. Flag for review

Previous Question Next Question