User: RobbieR, Location: Atlanta
Asked on: Monday, February 14, 2011 at 8:40 am EST
Answered on: Tuesday, May 14, 2024 at 1:33 am EDT
Question: Hey ya'll,First time back in quite awhile.I wanted to get your input on a unique application that I've never run into before.Our client wants (8) fluorescent 2x4 fixtures with a dimmable ballast installed in a Telepresence Room (A virtual meeting room with cameras). They want each fixture to have its own wall mounted dimmer switch for a total of eight dimmers. Basically, a parallel type connection. They want to be able to dim each fixture individually without the need of dimming the entire room. This is to adjust the lighting in the room for the cameras. Keep in mind that they want to stay inexpensive. No fancy lighting controls.I was thinking about using one branch circuit to power the lights, but I?ve heard of horror stories of shared neutrals and dimmer switches resulting in flickering lights. Since the lighting is sensitive to this room, is it overkill to route a separate branch circuit with a dedicated neutral for each fixture? That is the only way I can think of that would reduce the chance of potential problems.Thanks in advance!
Separate Branch Circuits with Dedicated Neutrals
To minimize the risk of flickering and ensure proper dimming performance, it is recommended to use separate branch circuits with dedicated neutrals for each fixture. This will isolate each fixture from the others, eliminating the potential for shared neutral issues.
Parallel Connection
Connect each fixture to its own branch circuit and dimmer switch in a parallel configuration. This allows for individual dimming control of each fixture.
Ballast Compatibility
Ensure that the fluorescent ballasts used are compatible with dimming. Not all ballasts are dimmable, so it's crucial to verify compatibility before purchase.
Alternative for Inexpensive Option
If a higher budget is not available, consider using dimmable LED retrofit kits instead of traditional fluorescent fixtures and dimmable ballasts. LED kits are more energy-efficient, last longer, and offer better dimming performance than fluorescent systems.
Additional Tips Use high-quality dimmers and ballasts to reduce noise and flicker. Consider using separate wall plates for each dimmer switch for a more professional finish.* Test the lighting system thoroughly before final installation to ensure it meets the client's requirements.
Conclusion
While it may require a slightly higher initial investment, using separate branch circuits with dedicated neutrals is the best approach to achieve reliable dimming performance in this Telepresence Room application. For a more cost-effective alternative, consider using dimmable LED retrofit kits. Flag for review