Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Easy way to understand classified/hazardous locations

User: WilliamDiosy, Location: Monterey,TN

Asked on: Monday, February 14, 2011 at 9:57 am EST
Answered on: Tuesday, May 14, 2024 at 1:33 am EDT

Question: Hey there guys. I need to know if there is an easy way to understand hazardous and classified locations in the NEC. Are there any charts or cheat sheets out there that could help me understand these classifications better?Thanks for the help.

Understanding Hazardous and Classified Locations in the NECDefinition

A hazardous location is an area where there is a risk of fire or explosion due to the presence of flammable substances, combustible materials, or other hazardous conditions.

Classifications

The NEC classifies hazardous locations based on the type and extent of the hazard. There are three main classes:

Class I

Areas with flammable gases, vapors, or liquids present in sufficient quantities to produce an explosive or ignitable mixture


Class II

Areas with combustible dust present in sufficient quantities to produce a fire or explosion

Class III

Areas with ignitable fibers or flyings present in sufficient quantities to produce a hazardous condition

Divisions

Each class is further divided into divisions based on the probability and duration of the hazard:

Class I



Division 1

Hazardous gases or vapors present in normal operation and likely to persist

Division 2

Hazardous gases or vapors present under abnormal or infrequent conditions

Class II



Division 1

Combustible dust present in sufficient quantity to create a hazard under normal operation

Division 2

Combustible dust present in sufficient quantity to create a hazard under abnormal or infrequent conditions

Class III



Division 1

Ignitable fibers or flyings present in sufficient quantity to create a hazard under normal operation

Division 2

Ignitable fibers or flyings present in sufficient quantity to create a hazard under abnormal or infrequent conditions

Cheat Sheet

|

Location Class
| Description | Example

---|---|---
Class I, Division 1 | Flammable gases or vapors present in normal operation and likely to persist | Gasoline storage area
Class I, Division 2 | Flammable gases or vapors present under abnormal or infrequent conditions | Area adjacent to a gasoline storage area
Class II, Division 1 | Combustible dust present in sufficient quantity to create a hazard under normal operation | Grain mill
Class II, Division 2 | Combustible dust present in sufficient quantity to create a hazard under abnormal or infrequent conditions | Area adjacent to a grain mill
Class III, Division 1 | Ignitable fibers or flyings present in sufficient quantity to create a hazard under normal operation | Textile mill || Class III, Division 2 | Ignitable fibers or flyings present in sufficient quantity to create a hazard under abnormal or infrequent conditions | Area adjacent to a textile mill |Tips for Understanding

Consider the type and quantity of materials present. Identify potential ignition sources. Determine the probability and duration of the hazard. Refer to the NEC (Articles 500-506) for specific requirements related to hazardous locations.

Additional Resources:
[NEC Article 500](https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=70)* [NFPA 70E: Standard for Electrical Safety in the Workplace](https://www.nfpa.org/Codes-and-Standards/All-Codes-and-Standards/List-of-Codes-and-Standards/Detail?code=70E) Flag for review

Previous Question Next Question