Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Dedicated/Working space in Electrical/Mechanical Rooms

User: danedi, Location: Puerto Rico

Asked on: Monday, February 14, 2011 at 1:08 pm EST
Answered on: Tuesday, May 14, 2024 at 1:34 am EDT

Question: Good afternoon.I am working on a project for a pharmaceutical client. The work consist on analyzing some of their electrical/mechanical rooms with the idea of installing new condensate return piping for an enegy project. The problem I have is that the areas are very old, and they have suffered multiple additions with the end result being that many of the areas have problems with either the dedicated or the working space.The new piping to be installed is proposed below many of the electrical equipments (code violation).The electrical equipments consists of panels, VFD's, control cabinetes, transformermers, etc. Keep in mind these are very crowded areas.As a solution, I though that we could install a raised floor in some of the areas with the idea of 'creating' another floor level. With this, we could then install the new piping directly below the electrical equipment (dedicated space). We will also provide means of accessing below the raised floor level for maintenance or abnormal conditions.So the question would be: Is the ok? Does the raised floor addition create a code issue? All the equipments are fed from above, none have conduits going underground.Please give me your feedback.With anticipated thanks,Daniel

Code Compliance

In general, the installation of a raised floor in an electrical/mechanical room is permitted by the National Electrical Code (NEC) provided it meets certain requirements.According to Article 110.11(B), "Working Space" and Article 110.26(E), "Elevated Equipment," a workspace of at least 30 inches wide and 6 feet high must be provided in front and at the sides of electrical equipment. This workspace must be clear and unobstructed from the floor to a height of at least 6 feet above the equipment.

Considerations for Raised Floors Access to Equipment

The raised floor must provide adequate access to electrical equipment for maintenance and servicing.


Clearance

The raised floor must maintain the required clearance to electrical equipment and conduits.

Support and Stability

The raised floor must be designed and installed to support the weight of electrical equipment and other loads.


Fire Protection

The raised floor materials should be fire-rated to meet the applicable building codes.

Grounding

If the raised floor is metal or contains metal components, it must be properly grounded.

Advantages of Raised Floors
Dedicated Space

The raised floor creates a dedicated space for condensate return piping, eliminating conflicts with electrical equipment.

Improved Accessibility

Maintenance personnel can access equipment and piping below the raised floor without disturbing the electrical systems.


Space Utilization

The raised floor allows for the installation of new equipment and piping without compromising the required working space around electrical equipment.

Conclusion


Based on the information provided, the installation of a raised floor in an electrical/mechanical room to accommodate new condensate return piping is generally code-compliant provided it meets the requirements for working space, clearance, support, fire protection, and grounding. However, it is recommended to consult with a qualified electrical engineer to confirm compliance with local building codes and regulations. Flag for review

Previous Question Next Question