Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Does this make sense

User: Alwayslearningelec, Location: NJ

Asked on: Monday, February 14, 2011 at 3:57 pm EST
Answered on: Tuesday, May 14, 2024 at 1:34 am EDT

Question: A 16000AT drawout breaker feeding a 1200A ATS which feeds a 200a dist panel? If not , why? THanks:grin:

No, a 16000A drawout breaker cannot feed a 1200A ATS which feeds a 200A distribution panel.The main breaker (16000A) is rated for a much higher amperage than the ATS (1200A) and the distribution panel (200A). This would create a safety hazard as the main breaker would not be able to protect the downstream equipment in the event of a fault or overload.The main breaker should be sized to protect the downstream equipment, which means it should be rated for the maximum amperage that the equipment can draw. In this case, the main breaker should be replaced with a 1200A breaker to match the rating of the ATS. Flag for review

Previous Question Next Question