User: jango, Location: Louisville, Kentucky
Asked on: Monday, February 14, 2011 at 5:01 pm EST
Answered on: Tuesday, May 14, 2024 at 1:35 am EDT
Question: We have a scenario where the 200A meter panel needs to be over some distance from where the riser/weatherhead will be. The 1 1/2" rigid riser will have two 90's and I'll need to use two lenghts of pipe. My question is, is there anything wrong with joining the two pipes with a threadless waterproof rigid compression coupling??? Thanks for your input.
Yes, there are potential issues with using a threadless waterproof rigid compression coupling to join two lengths of 1 1/2" rigid conduit for a meter panel riser
Reduced Strength
Compression couplings rely on friction to hold the conduit in place. While they may provide a watertight seal, they may not be as strong as a threaded connection, especially in applications where there is vibration or movement.
Potential for Leaks
Over time, the compression seal may degrade or become loose, leading to water leaks. This is particularly concerning for a riser that is exposed to the elements.
Code Violations
In some jurisdictions, threadless couplings may not be approved for use in certain electrical applications, such as meter panel risers. Always check with your local building code and electrical inspector for specific requirements.
Recommended Solution
It is generally recommended to use threaded couplings to join lengths of rigid conduit for meter panel risers. Threaded couplings provide a stronger, more secure connection and are less likely to leak. They are also more likely to meet code requirements.If threading is not possible, alternative options include:
Using a watertight rigid coupling
These couplings use a rubber gasket to create a watertight seal, while providing a stronger connection than compression couplings.*
Enclosing the compression coupling in a weatherproof enclosure
This can help protect the coupling from the elements and reduce the risk of leaks.
Note: It is important to use an approved conduit sealing compound when installing any type of coupling to ensure a watertight connection. Flag for review