User: petersonra, Location: Northern illinois
Asked on: Tuesday, February 15, 2011 at 6:21 pm EST
Answered on: Tuesday, May 14, 2024 at 1:37 am EDT
Question: Situation.Control panel has a 25kVA 480 to 240/120 transformer in it.Is this an SDS requiring a connection to the nearest GE?The secondary of the transformer will directly feed into a panel board.Can the GEC be landed on the neutral bus of the panel board?
Is this an SDS requiring a connection to the nearest GE?
No, this is not an SDS requiring a connection to the nearest GE. An SDS (Service Disconnect Switch) is required when the output of the transformer exceeds 25kVA. In this case, the transformer is rated for 25kVA, which meets the requirement.
Can the GEC be landed on the neutral bus of the panel board?
Yes, the GEC (Grounding Electrode Conductor) can be landed on the neutral bus of the panel board. This is a common and acceptable practice. The neutral bus in the panel board is connected to the transformer secondary neutral, which is then connected to the GE (Grounding Electrode). This provides a proper path to ground for fault currents. Flag for review