User: Kdog76, Location: The Dairyland State
Asked on: Wednesday, February 16, 2011 at 9:28 am EST
Answered on: Tuesday, May 14, 2024 at 1:38 am EDT
Question: Im trying to locate a 6 port bolt-on lug to replace a one spot lug on a old 400 amp Square D fusible disconnect. The disconnect feeds five panels, and all the feeders are terminated underneath the one set of lugs on the load side of the disco. Inspector would let me use a power conversion block, but changing out the lugs would be a lot easier. I believe it uses a 3/8" bolt, and wire size max. is about 2/0's I think. I would need two of them. I got my suppliers digging around but I thought you guys might have a lead on something like this.
Part Identification Square D 6-Port Bolt-On Lug for 400 Amp Fusible Disconnect Bolt Size: 3/8" Maximum Wire Size: 2/0 AWGPotential Suppliers Square D
Contact your local Square D distributor.
Zinsco
May offer a compatible lug.
Siemens
May offer a cross-reference for the Square D part number.
Cooper Bussmann
May have a similar product.
Online Resources Grainger
https://www.grainger.com/category/electrical/circuit-protection/wire-connectors/bolt-on-lugs
Home Depot
https://www.homedepot.com/b/Electrical-Wiring-&-Supplies-Wire-Connectors-&-Terminals-Bolt-On-Terminals/N-5yc1vZ2evc
Lowes
https://www.lowes.com/pl/Bolt-on-lugs-Wire-connectors-terminals/4294703452
Additional Tips Check the Square D catalog or website for part numbers and specifications. Verify the exact bolt size and wire size before ordering. Consider using anti-oxidant paste on the bolt threads and lug terminals to prevent corrosion. Consult with a qualified electrician to ensure proper installation and safety. Flag for review