Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Article 110.24 of 2011 NEC

User: Ray Holder, Location: Logan, Utah

Asked on: Wednesday, February 16, 2011 at 11:51 am EST
Answered on: Tuesday, May 14, 2024 at 1:38 am EDT

Question: As per article 110.24 of the 2011 NEC, non-dwelling service equipment is required to be field marked with the amount of available fault current when installed or modified.Most electricians do not know how to do this calculation. Please give us an example of this calculation so we can get a better understanding on how to apply Article 110.24.

Example Calculation



Given

System voltage: 480V Transformer secondary impedance: 0.1% Equipment fault current rating: 10,000A Fuse or circuit breaker rating: 10,000A

Steps

1.

Calculate the available fault current at the transformer secondary

ISC = Voltage / (Z x 100)
where: ISC = Secondary fault current (A) Voltage = System voltage (V) Z = Transformer secondary impedance (%)
ISC = 480V / (0.1% x 100) = 480,000A
2.


Calculate the available fault current at the service equipment

ISC(S) = ISC / (1 + (Z' x FCR / Z))
where:
ISC(S) = Service fault current (A) Z' = Line impedance from transformer to service equipment (Ω) FCR = Fuse or circuit breaker rating (A)Assuming negligible line impedance (Z' = 0Ω):
ISC(S) = 480,000A / (1 + (0Ω x 10,000A / 0.1%))
ISC(S) = 480,000A / (1 + 0) = 480,000A


Result

Therefore, the available fault current at the service equipment is

480,000A
. This value should be field marked on the service equipment as required by Article 110.24. Flag for review

Previous Question Next Question