User: JLD, Location: Massachusetts
Asked on: Wednesday, February 16, 2011 at 2:12 pm EST
Answered on: Tuesday, May 14, 2024 at 1:39 am EDT
Question: What types of feeder wire can I use for direct buriel and still make entry into a building by code.
Types of Feeder Wire for Direct Burial and Entry into a Building UF (Underground Feeder) Cable
Insulated with cross-linked polyethylene (XLPE) Approved for direct burial without additional conduit Suitable for entry into a building through walls, floors, or ceilings
USE (Underground Service Entrance) Cable
Similar to UF cable, but with a thicker insulation Approved for direct burial and for use as service entrance cable, allowing it to terminate at a meter or panelboard
Direct Burial Cable (DB Cable)
Double-jacketed cable with a polyethylene inner jacket and a PVC outer jacket Approved for direct burial only Not suitable for entry into a building without using additional conduit
Note: All cables should be properly sized for the voltage, amperage, and distance. The entry point into the building should be sealed with an approved sealant to prevent moisture and pests from entering. Always refer to local building codes and consult with a qualified electrician before installing feeder wire. Flag for review