User: superyoshi, Location: Lockport, IL
Asked on: Wednesday, February 16, 2011 at 2:30 pm EST
Answered on: Tuesday, May 14, 2024 at 1:39 am EDT
Question: Current branch receptacle circuiting for this five story hotel is installed vertically. When one breaker is tripped, portions of eight different rooms lose power. We will be converting this into an Assisted Living facility so I want to make sure I follow article 210.25 for branch circuiting in a dwelling unit. Question is: Since the new rooms will only have a receptacle for a microwave and no other cooking equipment, will this be considered a dwelling unit and could the existing circuiting remain? Hope someone can give some input on this. I will meet with the AHJ soon but want to be prepared.
Consideration of Article 210.25 for Dwelling Unit Branch Circuiting
Yes, the existing receptacle circuiting could potentially remain if the following conditions are met: Definition of Dwelling Unit
According to the National Electrical Code (NEC) Article 100, a dwelling unit is "one or more rooms intended for occupancy as a separate living unit." Based on the information provided, each room in the hotel will become a separate living unit when converted to an Assisted Living facility.
Article 210.25 (D)
This article states that "in dwelling units, branch circuits shall be installed so that no more than one branch circuit supplies any one dwelling unit." In this case, each living unit (room) would be considered a separate dwelling unit.
Kitchen Microwave Exemption
Article 210.25(D)(2) states that "the kitchen shall not be considered as a separate dwelling unit." Since the new rooms will only have a receptacle for a microwave (no other cooking equipment), they would not be considered to have a kitchen. Therefore, the exception would apply, and the existing branch circuits could remain.
Meeting with the AHJPrior to meeting with the AHJ, consider the following
NFPA Bulletin
Refer to NFPA Bulletin 79-21, which provides additional guidance on applying Article 210.25 to assisted living facilities.
Building Code Considerations
Determine if there are any local building codes or AHJ interpretations that may affect the requirements.
Documentation
Obtain documentation of the existing branch circuit layout and the proposed conversion of the hotel.
During the meeting with the AHJ, present the following points: Explain that the rooms will be converted to separate living units, but will not have full kitchens. Cite Article 210.25(D)(2) and the NFPA Bulletin as support for maintaining the existing branch circuits.* Address any concerns or questions the AHJ may have.In conclusion, by providing a strong case and adhering to the NEC requirements, you may be able to persuade the AHJ to allow the existing branch receptacle circuiting to remain. However, it's crucial to obtain their approval before making any changes. Flag for review