Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Aluminum Ground

User: njtrombley, Location: Ohio

Asked on: Wednesday, February 16, 2011 at 2:43 pm EST
Answered on: Tuesday, May 14, 2024 at 1:40 am EDT

Question: We have a 2000 amp service we are installing at a Hotel and I thought I would get pricing on going with aluminum vs. copper wire for the ground going to the water line. I thought about this because we are using aluminum wire for our feeder wires throughout the whole building and said to my boss why not pull in aluminum for the ground in lieu of copper. We looked into it and its $600.00 cheaper than copper. Is anyone else doing this?

Use of Aluminum Wire for Grounding

Yes, it is acceptable to use aluminum wire for grounding purposes, including the connection to a water line. However, there are important considerations and code requirements to follow

Code Requirements:
NEC Article 250.52(C)(3) permits aluminum grounding conductors used for equipment grounding. NEC Table 250.122 provides specific grounding conductor requirements for various wire sizes and materials.

Advantages and Disadvantages of Aluminum Wire for Grounding



Advantages



Lower cost

Aluminum is significantly cheaper than copper.


Lighter weight

Aluminum is lighter than copper, making it easier to handle and install.

Disadvantages



Higher resistance

Aluminum has a higher electrical resistance than copper, which means it may not be suitable for all applications where low resistance is critical.


Oxidation

Aluminum is more susceptible to oxidation than copper, which can degrade the conductivity of the wire over time.

Best Practices



Use appropriate size

Select aluminum grounding conductors that meet the required ampacity and impedance requirements.


Protect from oxidation

Use antioxidant compounds or joint compound to protect aluminum connections from oxidation.

Avoid contact with dissimilar metals

Avoid splicing or connecting aluminum wire directly to copper wire. Use transition fittings or connectors to prevent galvanic corrosion.


Install grounding rods properly

Grounding rods installed with aluminum conductors should be coated with a conductive compound to enhance conductivity.

Conclusion:


Using aluminum wire for grounding is acceptable and can save costs. However, it is important to follow code requirements and best practices to ensure a safe and effective grounding system. It is recommended to consult with a qualified electrician to determine the suitability of aluminum wire for your specific application. Flag for review

Previous Question Next Question