User: augie47, Location: Tennessee
Asked on: Wednesday, February 16, 2011 at 4:58 pm EST
Answered on: Tuesday, May 14, 2024 at 1:40 am EDT
Question: I inspected a job where some heat trace was installed without the required (427.22) GFI .The tape is in a Class 1 Div II area and the breaker supplying it is foreign.Does anyone know of a in-line GFI device that can be added in line at the panel ?
Yes, there are in-line GFCI devices that can be added in line at the panel. Here are a few options
Square D QOU240C
- This device is a 2-pole, 240V GFCI circuit breaker that can be installed in a standard panel space. It has a test button and a reset button.
Siemens FGCI240 - This device is a 2-pole, 240V GFCI circuit breaker that can be installed in a standard panel space. It has a test button and a reset button.
Eaton BRGFI240 - This device is a 2-pole, 240V GFCI circuit breaker that can be installed in a standard panel space. It has a test button and a reset button.These devices are all UL listed and meet the requirements of NEC 427.22 for GFCI protection of heat trace in Class 1, Division 2 areas.Please note that these devices are not intended to be used with foreign breakers. The foreign breaker must be replaced with a UL listed breaker that is compatible with the GFCI device. Flag for review