Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: siemens hed4 15 amp 3 pole 480volt circuit breaker

User: ddubbs103, Location: Massachusetts

Asked on: Wednesday, February 16, 2011 at 5:39 pm EST
Answered on: Tuesday, May 14, 2024 at 1:40 am EDT

Question: I would greatly appreciate if any one could tell me what the m and b mean in these breakers siemens hed43m015 hed43b015 the reason I ask is I have to order a breaker for an older ite siemens panel for a liebert unit and i am not sure what the difference is in these breakers. It is 3 pole 15amp breaker in 480 volt panel thanks for any info.

m

Main Breaker

b

Branch BreakerThe

main breaker
is the main power supply breaker for the entire electrical panel. It is typically rated for a higher amperage than the branch breakers, and it protects the entire panel from overloads and short circuits.The branch breakers are used to protect individual circuits within the electrical panel. They are typically rated for a lower amperage than the main breaker, and they protect only the specific circuit they are connected to.In your case, you need to order a branch breaker (b) for a 3-pole circuit with a 15 amp rating. The voltage rating of the breaker should match the voltage rating of the panel, which is 480 volts.Therefore, the correct breaker to order for your Liebert unit is the hed43b015. Flag for review

Previous Question Next Question