User: Open Neutral, Location: Inside the Beltway
Asked on: Thursday, February 17, 2011 at 1:31 am EST
Answered on: Tuesday, May 14, 2024 at 1:42 am EDT
Question: A friend & fellow EE is remodeling; AHJ required AFCI and GFI's. He passed the electrical inspection but asked two questions:What's the backstory on the 5->30mA relaxation vs GFI's?How is he supposed to run his Skil Saw and/or hand drill when they trip the AFCI every time?I'm a failure; I could answer neither, even after studying the FAQ. Can folks here help redeem me?
Backstory on the 5->30mA Relaxation vs GFCIs
GFCIs (Ground Fault Circuit Interrupters)
Detect small (5 mA) ground faults to prevent shock hazards.
AFIs (Arc-Fault Circuit Interrupters)
Detect and interrupt dangerous electrical arcs caused by damaged wiring or faulty connections.Initially, GFCIs were the standard for preventing shock hazards. However, research showed that GFCIs could miss some dangerous arcs that could ignite fires.The National Electrical Code (NEC) added AFCI requirements in 2002 to address this concern. AFCIs have a relaxation time of 5-30 milliseconds to allow brief, non-hazardous arcs (e.g., from plugging in a device) to dissipate without tripping.
How to Use Power Tools with AFCIs
Use a GFCI adapter
GFCI adapters can be plugged into an outlet, allowing GFCI protection for a single tool. This can prevent tripping the AFCI if the tool causes small, non-hazardous arcs.
Identify and eliminate arc sources
Check power cords, connections, and brush assemblies for signs of arcing. If possible, repair or replace faulty components.
High-quality power tools
Higher-quality tools with well-suppressed arcs are less likely to trip AFCIs.
Turn off unneeded tools
When not using power tools, turn them off to reduce the risk of tripping the AFCI.
Test the AFCIs regularly
As per NEC requirements, AFCIs should be tested monthly to ensure they are functioning properly.
Additional Tips: Use heavy-duty extension cords specifically designed for power tools. Avoid using long extension cords, as they can increase resistance and exacerbate arcing. Inspect power tools regularly for signs of damage or wear.* If an AFCI trips frequently, even with no power tools connected, consult a licensed electrician to identify the underlying electrical problem. Flag for review