User: natfuelbill, Location: NE Arkansas
Asked on: Thursday, February 17, 2011 at 6:48 am EST
Answered on: Tuesday, May 14, 2024 at 1:42 am EDT
Question: 1. Can CFLs be used in these incandescent fixtures?Area is classified due to methane.The fixtures are installed and from Crouse-Hinds, Appleton and killark.2. Putting the UL issue aside for a moment. is the use of CFLs known to be dangerous? Any history of accidents?
1. Can CFLs be used in these incandescent fixtures?Answer
No, CFLs cannot be used in incandescent fixtures in an area classified due to methane.
Reason
Incandescent fixtures are not designed for CFLs. CFLs produce heat, which can cause the glass of the fixture to crack or explode. This can release hot glass and flammable gas, posing a fire and explosion hazard.
Specific to Methane Environments
Methane is a highly flammable gas. Using CFLs in incandescent fixtures in an area classified due to methane violates the explosion-proof requirements of the National Electrical Code (NEC) and other regulatory standards.
2. Putting the UL issue aside for a moment. is the use of CFLs known to be dangerous? Any history of accidents?Answer
Yes, the use of CFLs in incompatible fixtures can be dangerous.
Fire and Explosion Hazards
As mentioned earlier, using CFLs in incandescent fixtures can cause fires and explosions, especially in areas with flammable gases.
Documented Accidents
There have been documented cases of fires and explosions involving CFLs used in incompatible fixtures. For example, in 2013, a fire occurred in a restaurant due to a CFL being used in an incandescent fixture that was not UL-listed for CFLs.*
Other Hazards: Additionally, CFLs contain mercury, which is a toxic substance. If a CFL breaks, it can release mercury into the environment, posing a health hazard. Flag for review