User: clarice, Location: 3 Hr 2 Min from Winged Horses
Asked on: Thursday, February 17, 2011 at 10:34 am EST
Answered on: Tuesday, May 14, 2024 at 1:43 am EDT
Question: This heater is in an outdoor shed and it is attached to a solar water heating system. The panel and breaker are out of sight. There is a manual override on the timer, but it does have the tabs that click it off and on so.....even when placed manually in "off" the timer tabs could click back on....I'm thinking I should use installed a separate disconnect. What is the view of our esteemed council?
Yes, installing a separate disconnect switch is advisable in this situation.
Reasoning
Safety Hazard
The heater remains connected to the electrical system even when manually switched off due to the timer tabs. This poses a safety hazard as the heater could potentially turn on unexpectedly, leading to fire or electric shock.
Code Requirements
The National Electrical Code (NEC) requires readily accessible disconnect means for outdoor heating equipment rated over 50 amps.
Maintenance and Repair
A separate disconnect switch allows for easy isolation of the heater during maintenance or repair work. Without the disconnect, it would be necessary to turn off the entire solar water heating system breaker to work on the heater safely.
Recommendations: Install a disconnect switch near the heater that is readily accessible and clearly labeled. Ensure the disconnect switch is rated for the current draw of the heater. Consider using a double-pole disconnect switch to interrupt both the hot and neutral conductors.* Test the disconnect switch regularly to ensure proper operation.By installing a separate disconnect switch, you can enhance safety, comply with code requirements, and simplify maintenance and repair tasks for the heater. Flag for review