User: jmellc, Location: Durham, NC
Asked on: Thursday, February 17, 2011 at 12:46 pm EST
Answered on: Tuesday, May 14, 2024 at 1:43 am EDT
Question: I'm doing some work in a building with a Square D CB type panel, probably from 40's or 50's. I have a call out to s vintage supplier in NC, haven't heard back. Anyone here know of a source?I'm amazed that these breakers are still in pretty good shape, trip as needed. Problem is that the original EC put nearly everything on 15A breakers & some receptacles are tripping with the loads, about 13 amps, just over limit for 15A.
Vintage Electrical Supply Sources Antique Electrical Supply
https://www.antiqueelectrical.com/
DC Parts
https://www.dcparts.com/
NOS Parts
https://www.nosparts.com/
Vintage Power Supply
https://vintagepowersupply.com/
Specific Parts for Square D CB Panel Breaker Parts.com
https://www.breakerparts.com/electrical/square-d-cb-type-breakers.html
Electric Supply Hub
https://www.esupplyhub.com/square-d-cb-breaker-parts
Additional Information Square D CB Panel Information
https://www.electricalclassroom.com/articles/old-square-d-cb-panel/
Upgrading Square D CB Panels
https://www.nachi.org/square-d-electrical-panels-with-no-ground-wire-deficiencies.htm
Tips for Dealing with Overloaded Circuits Identify the overloaded circuits
Use a clamp-on ammeter to measure the current draw.
Reduce the load
Unplug any unnecessary devices or appliances. Consider using power strips with surge protection to reduce the number of devices on a single circuit.
Upgrade the breaker
If the load is consistently exceeding 15 amps, consider upgrading to a 20 amp breaker. However, consult with a qualified electrician before making this change to ensure the wiring and panel can handle the increased amperage.
Add a subpanel: If multiple circuits are overloaded, consider adding a subpanel to distribute the load and provide additional capacity. Flag for review